FE Myers Rustler Submersible Pumps
FE Myers Rustler Data and Price
Myers highly
successful Rustler is a durable field proven pump designed for a wide range of
applications. The tough corrosion resistance design featuring
Teflon® reinforced polyester staging coupled with a powerful motor has proven to
be a reliable industry leader. The features of the Rustler pump give our customers the advantages needed to be
successful
in today's tough market. For more details, contact your local Myers distributor or Myers headquarters located in Ashland, OH
(since 1870) at 419-289-1144.
60 Hz available in ½, ¾, 1, 1-½, & 2HP
Pumping Capacity: 5, 8, 12, 20 and 25 GPM
60 Hz available in ½, ¾, 1, 1-½, & 2HP
Pumping Capacity: 5, 8, 12, 20 and 25 GPM
Advantages by design of our submersible well pumps:
|
|
FE Myers Rustler Pump End Data*
Need more complete FE Myers Rustler information?Get the instructions to install the FE Myers Rustler properly
| Order Number | HP | Stages | Length (In.) |
Weight (Lbs.) |
| N512 | ½ | 7 | 13-3/4 | 6 |
| N1020 | 1 | 8 | 15-3/4 | 7 |
* Repairable design pump end. Laser welded pump end not available separately.
NOTE: To order a complete pump and motor assembly combine the motor order number followed by the pump water end order number. Complete numbers for models with a CentriPro motor or numbers for a model with a Franklin Electric motor differ only by a "C" or "F" in the motor code. The price book contains price lists for both versions.
EXAMPLE: a 50C3116G17 = a ½ HP, 230V, 3-wire CentriPro motor on a 6G17 water end. A 50F3116G17 is the same pump with an FE motor.
EXAMPLE: a 50C3116G17 = a ½ HP, 230V, 3-wire CentriPro motor on a 6G17 water end. A 50F3116G17 is the same pump with an FE motor.
Pentek 4" Single-Phase 2 Wire Motor Data
Want more complete Pentek Motor information?| FE Myers No. | Type | HP | Volts | Length (In.) |
Weight (Lbs.) |
| P42B0005A1 | 2- Wire *PSC | 1/2 | 115 | 11.0 | 19.2 |
| P42B0005A2 | 2- Wire *PSC | 1/2 | 230 | 11.0 | 19.2 |
| P42B0010A2 | 2- Wire *PSC | 1 | 230 | 13.3 | 24.5 |
*PSC - permanent split capacitor
- NEMA Motor
- End Bell - 304L cast stainless steel, rounded bottom
- Shell - 304L stainless steel, laser-welded to end bells
- Motor Shaft - 17-4 precipitation hardened SS
- Insulation - Class F, 311°F (155°C)
- Max. Water Temp. - 86°F (30°C)
- Fasteners - 304-grade stainless steel
- Lip Seal - Nitrile
- Sand Boot Nitrile
- Cable - Field-serviceable, controlled compression design UL, CSA and NSF approved
- Cable Length - 48”_ 1/2 HP to 1-1/2 HP; 100”_ 2 HP and above
- Diaphragm - EPDM
- Thrust Bearings - Kingsbury-type, pivot shoe, carbon graphite mating ring
- Thrust Load Capacity - 2 wire motors rated at 700lbs.
Complete FE Myers Rustler 2 Wire Pump Assemblies
Need more complete FE Myers Rustler information?| FE Myers No. | Type | HP | Volts | Length (In.) |
Weight (Lbs.) |
| 2NFL51-12 | 2- Wire *PSC | 1/2 | 115 | 23-1/4 | 24 |
| 2NFL52-12 | 2- Wire *PSC | 1/2 | 230 | 23-1/4 | 24 |
| 2NFL102-20 | 2- Wire *PSC | 1 | 230 | 27-1/2 | 31 |
*PSC - permanent split capacitor
Myers Rustler 4" 2-Wire Submersible Pumps
(3 wires including ground wire)
SINGLE PHASE MODELS
| Description | Impeller Material |
HP | Stages | PH Volts HZ |
Suction Discharge Female NPT |
Shopping Cart View Cart |
|
2NFL51-12-P4 Selection Table |
Teflon reinforced polyester | 1/2 | 7 | 1PH 115V 60HZ |
1-1/4" | |
|
2NFL52-12-P4 Selection Table |
Teflon reinforced polyester | 1/2 | 7 | 1PH 230V 60HZ |
1-1/4" | |
|
2NFL102-20-P4 Selection Table |
Teflon reinforced polyester | 1 | 8 |
1PH 230V 60HZ |
1-1/4" |
Please Note: FREE shipping is to the lower US 48 States on all Myers Pumps. There is a 6% Sales Tax that applies only to Florida residents without a resale certificate.
Need a Submersible Splice Connection Kit ?
|
|
|
|