Grundfos MQ3 MARKIII
On Demand Tankless Pump

Looking for another alternative?   click here

• Class A capacitor increases length of operation
• More robust printed circuit board offers increased capacity to function during power fluctuations
• Potting material has been added to protect printed circuit board components
• High torque motor assures positive starts
• Diffuser design increases hydraulic performance

• Motor overload protection
• Motor over temperature protection
• Pump dry run protect

The Grundfos MQ3 multi-stage pump works without an additional tank making it the easiest way to boost city water pressure. The Grundfos MQ3 is also a perfect solution for pumping water from your storage tank or shallow well.

The Grundfos MQ3 is a self-priming multistage centrifugal pump. The Grundfos MQ3 self-primes from a well depth down to 25 feet within a maximum time of five minutes. The Grundfos MQ3 pump is a perfect solution when pumping water from a storage tank. The Grundfos MQ3 is also a  great solution to boosting city water pressure. When boosting water pressure we suggest the MQ3-35 3/4HP using an inlet pressure of 10 to 15PSI. Remember (inlet pressure(?) + MQ3 available pressure = outlet pressure). Therefore the outlet pressure can be adjusted to meet your needs by simply adjusting the inlet pressure using the suggested direct fit PRV. The Grundfos MQ3 centrifugal pump is built for long-life, trouble-free operation. It is made from weatherproof, corrosion-resistant materials and the motor is water cooled. When mounted outside it should be fully covered to avoid the elements.

EASY TO SELECT

The Grundfos MQ makes it easy to select the right water booster pump. The MQ is an all-in-one unit with two models to choose from. There is no need to worry about a separate pressure tank, pressure switch, electrical connections, fittings or any other separate items. With MQ, it is literally a matter of connecting the power and turning on the jet pump. Installation of an MQ pump is simple and can be done in a matter of minutes, which gives you more time to relax. The Grundfos MQ features an easy-to-use control panel with indicator lights for indication of:

• pump on
• auto reset
• alarm (dry-running or overheating).

UNIQUE USER BENEFITS

"Whisper quiet operation," the MQ is specially designed for use in domestic applications where low noise is a major consideration. The pump is cooled by the pumped water which eliminated the need for a noisy cooling fan. Because the pump is self cooling, you don’t need to have free space around the pump for cooling purposes. The MQ "anti-cycling" feature prevents the pump from continuously starting and stopping when you have a dripping tap or minor leak in the system.

PROTECTIVE FEATURES

The MQ pump has built-in dry-run protection. If the pump runs dry, the pump automatically stops. It will then attempt to restart every half hour for a maximum of 24 hours until water is available from the source. If more than 24 hours pass without water, the pump must be restarted manually. The auto reset function can also be disabled. The Grundfos M Q pump also has built-in thermal protection. If the pump overheats it immediately stops. After a 30-minute cooling-down period, the pump will automatically restart. The Grundfos M Q has an easy accessible priming plug for filling the pump with water before start. It also has a drain plug to prevent the pump from freezing.

FEATURES/BENEFITS

• Easy to select
• Easy to install
• Easy to operate
• Self-priming down to a depth of 25 ft (8 m)
• Low noise
• Anti-cycling feature
• Dry-run protection
• Corrosion-free – suitable for potable water
• User-friendly control panel
• Tough and reliable
• Space-saving – no tank required
• Use anywhere: homes, cottages, farms, greenhouses and more