CentriPro
BALANCED FLOW®
BF20(3/4-2HP), BF30(3HP) & BF50(5HP)
Constant Pressure Submersible Deep Well Systems
Click below for prices and data
5GPM 7GPM 10GPM 13GPM 18GPM 25GPM
FEATURES
- NEMA 3R Enclosure: Rainproof, outdoor rated enclosure.
- Current Limit Selector Switch: Rotary switch to set current limit
to match motor Service Factor Amps.(SF or SFA) - Dry Well Sensitivity Switch: Choice of low or high sensitivity
- Pressure Drop: Choose a 5 or 20 PSI pressure drop for restarts.
- Broken Pipe: Set on or off depending on application.
- Constant Pressure: Provides consistent pressure even as flow requirements vary.
- Controller acts as a pump protection and troubleshooting device.
Flashing lights indicate system faults. - Standard pressure sensor cable is 15' long.
Optional 25', 50' and 100' are available. - Integrated output motor filter protects the motor from voltage spikes and limits
electrical interference with devices such as portable telephones, radios, televisions
and garage door openers. - Cooling Fan: Allows operation in ambient temperatures up to 122 degrees F.
BALANCED FLOW CONTROLLER - NEW FEATURES
New, more versatile user interface board
Provides switch connection for optional pressure or level switch.
N.O. Float* - use to pump down - empty a tank or for a low water protection
N.C. Float** - use to pump up - fill a tank or pond
Pressure Switch - use for over-pressure protection
- New current limit settings
- Dry well sensitivity switch
- Broken pipe protection
- Choose a 5 or 20 PSI pressure drop for restarts
- Transducer better protected from transient power surges
* Normally Open - switch contacts are open in the hanging (down) position
** Normally Closed - switch contacts are closed in the hanging (down) position
** Normally Closed - switch contacts are closed in the hanging (down) position
TRANSDUCER - NEW AND IMPROVED
- Larger port orifice to prevent clogging
- Case to electronics surge protection
- All Stainless Steel construction
- Pressure surge capability without the use of a pressure snubber
- Case coupled noise immunity
- Reverse voltage protection
- Line to electronics ground surge protection on all lines
- Transducer cable has ground wire built in
- Ground clamp provided for transducer to cable grounding
Frequently Ask Questions clicking here
View all pumping ranges by clicking here
- To Design Your System You Will Require
- 1. BF Controller Capable Of Operating The 3PH Motor Required
- 2. *Pump End Selection That Meets Your GPM & Pressure Required
- 3. 3 Phase Motor With The HP Required To Operate The Pump End
*Note: You will need to add the following to calculate the head
required (measured in feet) to acquire your systems requirements.
- How far it is to the surface of the water in feet.
- Multiply the PSI required throughout the GPM range of your system X 2.3 feet.
- Add additional vertical lift measure in feet from the top of the well to the highest point of water delivery.
- Measure the entire length of pipe in feet from the depth of the pump to the farthest distance in waters delivery. Caution: Chart is per 100' of pipe used view friction chart in .pdf
- Add the measurements in feet collected in lines 1 through 4 = total head required for the system.
- Selected a pump graph for required GPM.
- From left to right draw a horizontal line that represents your total head from line 5.
- At the bottom of the graph select the GPM the system should provided. Draw a horizontal line from the bottom to top representing that GPM.
- The pump curve above the intersection of line 7 and 8 will be the pump and HP required. The pump intersection should be 50% to 80% from the left side of the graph. If not, try the GPM graph below or above it to make sure your at the proper efficiency level
Still Not Sure? Call 1-866-960-9621 for help
5 GPM
top
| Description | HP | PH | Volts | Diameter/ Dimensions Inches |
Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
5GS07 Pump end only Pumping Range Choose Motor Manufacture Below |
3/4 | 4" | 15 |
|
||
|
Franklin Motor 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 21 |
|
|
CentriPro 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
5GS10 Pump end only Pumping Range Choose Motor Manufacture Below |
1 | 4" | 19 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 24 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
5GS15 Pump end only Pumping Range Choose Motor Manufacture Below |
1-1/2 | 4" | 21 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
5GS20 Pump end only Pumping Range Choose Motor Manufacture Below |
2 | 4" | 24 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
7 GPM
top
| Description | HP | PH | Volts | Diameter | Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
7GS07 Pump end only Pumping Range Choose Motor Manufacture Below |
3/4 | 4" | 14 |
|
||
|
Franklin Motor 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 21 |
|
|
CentriPro 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
7GS10 Pump end only Pumping Range Choose Motor Manufacture Below |
1 | 4" | 15 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
7GS15 Pump end only Pumping Range Choose Motor Manufacture Below |
1-1/2 | 4" | 19 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
7GS20 Pump end only Pumping Range Choose Motor Manufacture Below |
2 | 4" | 23 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
|
BF 30 BALANCED FLOW CONTROLLER (includes BF30 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 20 | |
|
7GS30 Pump end only Pumping Range Choose Motor Manufacture Below |
3 | 4" | 28 |
|
||
|
Franklin Motor 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 35 |
|
|
CentriPro 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 15 |
|
10 GPM
top
| Description | HP | PH | Volts | Diameter | Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
10GS07 Pump end only Selection Chart Choose Motor Manufacture Below |
3/4 | 4" | 13 |
|
||
|
Franklin Motor 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 21 |
|
|
CentriPro 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
10GS10 Pump end only Selection Chart Choose Motor Manufacture Below |
1 | 4" | 15 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
10GS15 Pump end only Selection Chart Choose Motor Manufacture Below |
1-1/2 | 4" | 17 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
10GS20 Pump end only Selection Chart Choose Motor Manufacture Below |
2 | 4" | 19 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
|
BF 30 BALANCED FLOW CONTROLLER (includes BF30 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 20 | |
|
10GS30 Pump end only Selection Chart Choose Motor Manufacture Below |
3 | 4" | 24 |
|
||
|
Franklin Motor 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 35 |
|
|
CentriPro 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
10GS50R Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 21 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
10GS50 Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 24 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
13 GPM
top
| Description | HP | PH | Volts | Diameter | Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
13GS07 Pump end only Selection Chart Choose Motor Manufacture Below |
3/4 | 4" | 12 |
|
||
|
Franklin Motor 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 21 |
|
|
CentriPro 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
13GS10 Pump end only Selection Chart Choose Motor Manufacture Below |
1 | 4" | 13 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
13GS15 Pump end only Selection Chart Choose Motor Manufacture Below |
1-1/2 | 4" | 15 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
13GS20 Pump end only Selection Chart Choose Motor Manufacture Below |
2 | 4" | 17 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
|
BF 30 BALANCED FLOW CONTROLLER (includes BF30 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 20 | |
|
13GS30 Pump end only Selection Chart Choose Motor Manufacture Below |
3 | 4" | 19 |
|
||
|
Franklin Motor 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 35 |
|
|
CentriPro 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 15 |
|
18 GPM
top
| Description | HP | PH | Volts | Diameter | Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
18GS07 Pump end only Selection Chart Choose Motor Manufacture Below |
3/4 | 4" | 12 |
|
||
|
Franklin Motor 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 21 |
|
|
CentriPro 3/4HP 3 PH Motor Specifications |
3/4 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
18GS10 Pump end only Selection Chart Choose Motor Manufacture Below |
1 | 4" | 13 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
18GS15 Pump end only Selection Chart Choose Motor Manufacture Below |
1-1/2 | 4" | 15 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
18GS20 Pump end only Selection Chart Choose Motor Manufacture Below |
2 | 4" | 17 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
|
BF 30 BALANCED FLOW CONTROLLER (includes BF30 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 20 | |
|
18GS30 Pump end only Selection Chart Choose Motor Manufacture Below |
3 | 4" | 19 |
|
||
|
Franklin Motor 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 35 |
|
|
CentriPro 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
18GS50R Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 24 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
18GS50 Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 29 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
25 GPM
top
| Description | HP | PH | Volts | Diameter | Ship Weight lbs. |
Shopping Cart View Cart |
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
25GS10 Pump end only Selection Chart Choose Motor Manufacture Below |
1 | 4" | 13 |
|
||
|
Franklin Motor 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 23 |
|
|
CentriPro 1HP 3 PH Motor Specifications |
1 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
25GS15 Pump end only Selection Chart Choose Motor Manufacture Below |
1-1/2 | 4" | 14 |
|
||
|
Franklin Motor 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 24 |
|
|
CentriPro 1-1/2HP 3 PH Motor Specifications |
1-1/2 | 3 | 230 | 4" | 15 |
|
|
BF 20 BALANCED FLOW CONTROLLER (includes BF20 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3/4 to 2HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 19 | |
|
25GS20 Pump end only Selection Chart Choose Motor Manufacture Below |
2 | 4" | 16 |
|
||
|
Franklin Motor 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 28 |
|
|
CentriPro 2HP 3 PH Motor Specifications |
2 | 3 | 230 | 4" | 15 |
|
|
BF 30 BALANCED FLOW CONTROLLER (includes BF30 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
3HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 20 | |
|
25GS30 Pump end only Selection Chart Choose Motor Manufacture Below |
3 | 4" | 18 |
|
||
|
Franklin Motor 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 35 |
|
|
CentriPro 3HP 3 PH Motor Specifications |
3 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
25GS50R Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 24 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
|
BF 50 BALANCED FLOW CONTROLLER (includes BF50 controller, pressure sensor, sensor cable, splice kit and 2 gallon expansion tank) |
5HP | 1 | 230 | 18.6 X 9.9 X 5.3 | 25 | |
|
25GS50 Pump end only Selection Chart Choose Motor Manufacture Below |
5 | 4" | 24 |
|
||
|
Franklin Motor 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 55 |
|
|
CentriPro 5HP 3 PH Motor Specifications |
5 | 3 | 230 | 4" | 15 |
|
Don't see what you are looking for? Please call 1-866-960-9621 for information!